Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
(Click here)


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C249870
  1. Remove the nut and separate the front stabilizer link assembly from the front shock absorber assembly.

    HINT:
    Use a hexagon socket wrench to hold the stud.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as the LH side.



4. REMOVE STEERING LINK ASSEMBLY


    C244486
  1. Remove the 2 bolts, 2 nuts and steering link assembly from the front suspension crossmember sub-assembly.

    NOTICE:
    Keep the nut from rotating while turning the bolt because the nut has its own stopper.



5. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    C249885
  1. Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front suspension crossmember sub-assembly.



6. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:
Perform the same procedure as the LH side.



7. REMOVE FRONT STABILIZER BAR


8. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
  1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.