Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE

PARKING BRAKE CABLE > REMOVAL

for Preparation Click here


HINT:
Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    C251697
  1. Remove the 3 bolts and No. 1 console box mounting bracket.



3. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET


    C251698
  1. Remove the bolt and No. 3 console box mounting bracket.



4. LOOSEN LOCK NUT


    C247540E01
  1. Loosen the lock nut.
    Text in Illustration 
    *1
    Lock Nut

    NOTICE:
    If the lock nut has been removed from the rod, replace the lock nut with a new one.



5. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(Click here)


6. REMOVE FRONT NO. 4 FLOOR HEAT INSULATOR (for RH Side)


    C247550
  1. Remove the 2 nuts and front No. 4 floor heat insulator.



7. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for RH Side)


    C247551
  1. Remove the clip.

  1. Remove the bolt and No. 1 fuel tank protector sub-assembly.



8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    C268394
  1. Disengage the 2 claws to remove the parking brake cable stopper.



    C268395E01
  1. Separate the No. 3 parking brake cable assembly from the parking brake equalizer.
    Text in Illustration 
    *1
    Parking Brake Equalizer
    *2
    No. 2 Parking Brake Cable Assembly
    *3
    No. 3 Parking Brake Cable Assembly



    C249929
  1. Remove the bolt and separate the No. 3 parking brake cable assembly.



  1. Remove clamp B from the body.


    C249928E01

  1. Remove the 4 bolts, disengage clamp A and remove the No. 3 parking brake cable assembly.



9. REMOVE NO. 1 PARKING BRAKE CABLE CLAMP


    C235598
  1. Disengage the 2 claws to remove the No. 1 parking brake cable clamp from the No. 3 parking brake cable assembly.