TIRE PRESSURE WARNING VALVE > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING VALVE AND TRANSMITTER |
Install a new grommet to the tire pressure warning valve and transmitter.
![]() |
Write down the 7-digit transmitter ID number shown in the illustration.
| *a | Printed Surface |
| *b | 7-digit Transmitter ID Number |
Insert the tire pressure warning valve and transmitter with grommet from the inside of the rim.
![]() |
Install the washer to the tire pressure warning valve and transmitter from the outside of the rim, and using an 11 mm socket wrench, tighten the nut.
| *1 | Tire Pressure Warning Valve and Transmitter |
| *2 | Grommet |
| *3 | Washer |
| *4 | Nut |
| *a | Rim |
![]() |
Set the tire and disc wheel to the mounting machine as shown in the illustration.
| *a | Rim |
| *b | Mount Tool of the Mounting Machine |
| *c | 60° |
![]() | Rim Rotating Direction |
![]() | Area for Tire Pressure Warning Valve and Transmitter |
Apply a sufficient coat of soapy water or equivalent to the tire bead and rim.
Using a mounting machine, install the tire to the disc wheel.
Install a new valve core.
Inflate the tire to the specified tire inflation pressure.
After the tire is inflated, the nut may be loose. Using an 11 mm socket wrench, retighten the nut to the specified torque.
Check the surroundings of the tire pressure warning valve and transmitter for air leaks with soapy water or equivalent.
If air is leaking from the valve core, press the valve core several times to remove foreign matter. Replace the valve core as necessary.
If air is leaking from around the tire pressure warning valve and transmitter, check that the grommet, washer and nut are not deformed, damaged or contaminated with foreign matter. Replace the grommet, washer or nut as necessary.
Install the tire valve cap.
| 2. INSTALL WHEEL ASSEMBLY |
| 3. INSPECT TIRES |
Check the tires for wear and proper inflation pressure.
Adjust the tire pressure
| Tire Size | Front kPa (kgf/cm2, psi) | Rear kPa (kgf/cm2, psi) |
| 175/65R15 84H | 230 (2.3, 33) | 230 (2.3, 33)*1 220 (2.2, 32)*2 |
| 185/60R15 84H | 220 (2.2, 32) | 220 (2.2, 32) |
Perform initialization (Click here).
Tire pressure adjustment method when warm (w/ Tire Pressure Warning System:)
![]() |
Using a dial indicator, check the runout of the tires.
| 4. REGISTER TRANSMITTER ID |
| 5. INSPECT TIRE PRESSURE WARNING SYSTEM |
| 6. PERFORM INITIALIZATION |