Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for LED Headlight)

HEADLIGHT ASSEMBLY (for LED Headlight) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE HEADLIGHT ASSEMBLY


    E308413E02
  1. Remove the bolt and 2 screws.
    Text in Illustration 
    *a
    Bolt
    *b
    Screw



    E308882
  1. Disengage the clamp.

  1. Disconnect each connector and remove the headlight assembly.