Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
  1. Engage the guide.



  1. While pushing the tab shown by arrow (a), engage the claw as shown in the illustration.


    E237627E01



    E237625E01
  1. Push up the headlight cleaner actuator clamp as shown in the illustration.
    Text in Illustration 
    *1
    Headlight Cleaner Actuator Clamp



    E237623
  1. Install the headlight cleaner clamp.

  1. Install the headlight cleaner hose.



2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.



3. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER


    E237630
  1. Engage the 2 claws to install the headlight cleaner washer nozzle cover.

    HINT:
    Use the same procedure for the RH side and LH side.



4. INSTALL FRONT BUMPER ASSEMBLY
(Click here)