Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > INSTALLATION

for Preparation Click here



1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
  1. Install the parking brake switch assembly with the screw.

    Torque:
    0.9 N*m{ 9 kgf*cm , 8 in.*lbf }



2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
  1. Install the parking brake lever sub-assembly with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the parking brake switch connector.

  1. Connect the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly to the parking brake equalizer.

  1. Engage the 2 claws to install the parking brake cable stopper.



3. ADJUST PARKING BRAKE LEVER TRAVEL
(Click here)


4. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET


    C251698E01
  1. Install the No. 3 console box mounting bracket with the bolt.
    Text in Illustration 
    *a
    Stopper

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    NOTICE:
    Securely install the No. 3 console box mounting bracket so that its stopper contacts the parking brake lever support bracket as shown in the illustration.



5. INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET


    C251697
  1. Install the No. 1 console box mounting bracket with the 3 bolts.



6. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)