Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH

BACK DOOR OPENER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    B297006
  1. Remove the 10 clips and back door trim board assembly.



2. REMOVE BACK DOOR TRIM COVER


    B297007
  1. Disengage the 5 clips and back door trim cover.



3. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    B298031
  1. Disconnect the connector.

  1. Remove the 5 nuts.



    B298032
  1. Disengage the clip and remove the luggage compartment door outside garnish sub-assembly.

  1. Remove the back door opener switch assembly (Click here).

  1. Remove the 5 gaskets from the luggage compartment door outside garnish sub-assembly.



4. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    B297013
  1. Remove the back door opener switch.