SERVICE PLUG GRIP > INSTALLATION |
| 1. INSTALL SERVICE PLUG GRIP |
Wear insulated gloves and install the service plug grip in the order shown in the illustration.

Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.
| 2. INSTALL FRONT CENTER FLOOR COVER (for Separate Type Seatback) |
Engage the 2 guides to install the front center floor cover.
Install the 3 clips.
| 3. INSTALL FRONT CENTER FLOOR COVER (for Bench Type Seatback) |
Engage the 2 guides to install the front center floor cover.
Install the 3 clips.
| 4. INSTALL FRONT FLOOR COVER LH (for Separate Type Seatback) |
Engage the 3 guides.
![]() |
Engage the clip <B> to install the front floor cover LH.
Install the 2 clips <A>.
| 5. INSTALL FRONT FLOOR COVER LH (for Bench Type Seatback) |
Engage the 3 guides.
![]() |
Engage the clip <B> to install the front floor cover LH.
Install the 2 clips <A>.
| 6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
| 7. INSTALL FRONT FLOOR COVER RH (for Separate Type Seatback) |
Engage the 3 guides.
![]() |
Engage the clip <B> to install the front floor cover RH.
Install the 2 clips <A>.
| 8. INSTALL FRONT FLOOR COVER RH (for Bench Type Seatback) |
Engage the 3 guides.
![]() |
Engage the clip <B> to install the front floor cover RH.
Install the 2 clips <A>.