DTC C1553/53 When Resetting Voltage, Vehicle is Being Driven |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1553/53 |
|
|

| 1.CHECK HARNESS AND CONNECTOR (IG, PIG) |
![]() |
Disconnect the connectors from the power steering ECU assembly.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| G6-1 (IG) - A33-2 (PGND) | Power switch on (IG) | 9 to 16 V |
| A33-1 (PIG) - A33-2 (PGND) | Always | 9 to 16 V |
| *a | Front view of wire harness connector (to Power Steering ECU Assembly) |
|
| ||||
| OK | ||
| ||