Home › Power Source / Network › POWER DISTRIBUTION › POWER MANAGEMENT CONTROL ECU

POWER MANAGEMENT CONTROL ECU > REMOVAL

for Preparation Click here



1. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


2. REMOVE POWER MANAGEMENT CONTROL ECU


    E245183E01
  1. Disconnect the 4 connectors.
    Text in Illustration 
    *A
    for LHD:
    *B
    for RHD:



    E245184E01
  1. Remove the 2 nuts and power management control ECU.
    Text in Illustration 
    *A
    for LHD:
    *B
    for RHD: