Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY

FRONT TURN SIGNAL LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light plug assembly.



    E237709
  1. Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.



2. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY
  1. Engage the 2 claws to temporarily install the front turn signal light assembly.

  1. Install the front turn signal light assembly with the bolt.



3. INSTALL FRONT BUMPER ASSEMBLY
(Click here)