Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY

FRONT TURN SIGNAL LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY


    E308844
  1. Remove the 3 screws to remove the front turn signal light assembly.



3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    E308845
  1. Turn the front turn signal light plug assembly with the front turn signal light bulb as shown in the illustration to remove them as a unit.

  1. Remove the front turn signal light bulb from the front turn signal light plug assembly.