COMBINATION METER > INSTALLATION |
| 1. INSTALL COMBINATION METER ASSEMBLY |
Engage the clamp.
Connect the 2 connectors.
![]() |
Engage the 3 clips.
Install the combination meter assembly with the 2 screws.
| 2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Engage the 9 guides and 4 claws.
Install the instrument cluster finish panel sub-assembly with the 2 clips.
| 3. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY |
Engage the claw and 4 clips, to install the center instrument panel register assembly.
| 4. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Engage the 10 guides and 12 clips to install the instrument cluster finish panel garnish.
| 5. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD) |
Engage the 3 clips to install the No. 2 instrument panel register assembly.
| 6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD) |
Engage the 3 clips to install the No. 1 instrument panel register assembly.
| 7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Engage the claw and 8 clips to install the center instrument cluster finish panel sub-assembly.
| 8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
| 9. INSTALL FRONT FLOOR COVER RH |
Engage the 3 guides.
![]() |
Engage the clip <B> to install the front floor cover RH.
Install the 2 clips <A>.