88625Q
1.INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR
Connect the connector and aspirator.
|
Install in this Direction |
Engage the 2 claws to install the cooler (room temp. sensor) thermistor as shown in the illustration.
55433B
2.INSTALL NO. 2 LOWER INSTRUMENT PANEL FINISH PANEL
58848B
3.INSTALL SHIFT LEVER HOLE COVER
55406B
4.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55550
5.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
73900
6.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
58910C
7.INSTALL REAR CONSOLE BOX ASSEMBLY