Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3210E _59 Vehicle Exterior _047514 WIPER / WASHER _0233634 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 64790B 1.REMOVE BACK DOOR UPPER TRIM PANEL ASSEMBLY

Hide 67938A 2.REMOVE BACK DOOR SIDE GARNISH LH

Hide 67937B 3.REMOVE BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 74811B 4.REMOVE DOOR PULL HANDLE

Hide 67750 5.REMOVE BACK DOOR TRIM BOARD ASSEMBLY

Hide 67751 6.REMOVE BACK DOOR TRIM BOARD

Hide 7.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
E331332

Slide the rear wiper arm head cap as shown in the illustration to disengage the 2 claws.


b.
E331334

Disengage the 2 claws and open the rear wiper arm head cap as shown in the illustration.


c.
E331336

Remove the nut and rear wiper arm and blade assembly.


Hide 85143R 8.REMOVE REAR WIPER MOTOR GROMMET

a.
E331337

Remove the rear wiper motor grommet.


Hide 85110R 9.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E337156

Disconnect the connector.


b.

Remove the 3 bolts and rear wiper motor assembly.

HINT:

Remove the bolts and rear wiper motor assembly as a set.