CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY (DRIVER SEAT)
Remove the front seat cushion heater assembly (driver seat).
for Manual Seat : Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Manual Seat)>REMOVAL
for Power Seat : Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Power Seat)>REMOVAL
Remove the front seatback heater assembly (driver seat).
for Manual Seat : Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Manual Seat)>REMOVAL
for Power Seat : Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Power Seat)>REMOVAL
| *A | for LHD |
| *B | for RHD |
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly (Driver Seat)) |
| *b | Component without harness connected
(Front Seatback heater Assembly (Driver Seat)) |
Connect the B front seat cushion heater assembly (driver seat) connector and F front seatback heater assembly (driver seat) connector.
Apply auxiliary battery voltage and check the operation of the front seat heater according to the table below.
To prevent the front seat heater from overheating, be sure to disconnect the auxiliary battery from the front seat heater immediately after this inspection is completed.
| Auxiliary battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal b5-1*1
Auxiliary battery positive (+) → Terminal a5-1*2 |
·
Front seat cushion heater temperature 30 to 50°C (86 to 122°F) ·
Front seatback heater temperature 30 to 50°C (86 to 122°F) |
| Auxiliary battery negative (-) → Terminal b5-2 and b5-3*1
Auxiliary battery negative (-) → Terminal a5-2 and a5-3*2 |
*1: for LHD
*2: for RHD
CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY (FRONT PASSENGER SEAT)
Remove the front seat cushion heater assembly (front passenger seat).
for Manual Seat : Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Manual Seat)>REMOVAL
for Power Seat : Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Power Seat)>REMOVAL
Remove the front seatback heater assembly (front passenger seat).
for Manual Seat : Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Manual Seat)>REMOVAL
for Power Seat : Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Power Seat)>REMOVAL
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly (Front Passenger Seat)) |
| *b | Component without harness connected
(Front Seatback Heater Assembly (Front Passenger Seat)) |
Connect the C front seat cushion heater assembly (front passenger seat) connector and G front seatback heater assembly (front passenger seat) connector.
Apply auxiliary battery voltage and check the operation of the front seat heater according to the table below.
To prevent the front seat heater from overheating, be sure to disconnect the auxiliary battery from the front seat heater immediately after this inspection is completed.
| Auxiliary battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal M81-6 | ·
Front seat cushion heater temperature 36 to 40°C (96.8 to 104°F) ·
Front seatback heater temperature 36 to 41 °C (96.8 to 105.8 °F) |
| Auxiliary battery negative (-) → Terminal M81-7 and M81-5 |