Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type)
RM3210E _56 Audio / Visual / Telematics _047511 NAVIGATION / MULTI INFO DISPLAY _0239522 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.

OK:

No deformation or cracks on the CD



Result:
Proceed to
OK
NG



OK

2.CHECK CD

NG

END (CD IS FAULTY)

2.CHECK CD
a.
I100151

Check the CD.

OK:

The CD is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
OK
NG



OK

3.REPLACE CD AND RECHECK

NG

CLEAN CD

3.REPLACE CD AND RECHECK
a.

Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (CD WAS FAULTY)

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio and display receiver assembly installation condition.

i.

Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY