55435A
1.REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)
55405B
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
3.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET
Remove the 4 bolts.
|
Remove in this Direction |
Pull the radio receiver assembly with bracket toward the rear of the vehicle to disengage the 2 guides.
Disconnect each connector and remove the radio receiver assembly with bracket.
4.DISCONNECT NAVIGATION ECU WITH WIRE (w/ Navigation System)
Disconnect the connector.
Disconnect the 2 connectors to disconnect the navigation ECU with wire.
86211
5.REMOVE NO. 1 RADIO BRACKET
w/o Navigation System:
Remove the 3 screws and No. 1 radio bracket.
w/ Navigation System:
Remove the 5 screws and No. 1 radio bracket.
86212
6.REMOVE NO. 2 RADIO BRACKET
w/o Navigation System:
Remove the 3 screws and No. 2 radio bracket.
w/ Navigation System:
Remove the 5 screws and No. 2 radio bracket.
86140A
7.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
8.REMOVE NAVIGATION ECU WITH WIRE (w/ Navigation System)