Home › Engine / Hybrid System › 2ZR-FXE FUEL › FUEL PRESSURE REGULATOR(w/ Canister Pump Module)
RM3210E _51 Engine / Hybrid System _047496 2ZR-FXE FUEL _0241958 FUEL PRESSURE REGULATOR(w/ Canister Pump Module) A

2ZR-FXE FUEL  FUEL PRESSURE REGULATOR(w/ Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel filter.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



Hide 23220A 2.INSTALL FUEL PUMP WITH FILTER ASSEMBLY

Hide 77020A 4.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY