Home › Engine / Hybrid System › 2ZR-FXE FUEL › FUEL TANK(w/o Canister Pump Module)
RM3210E _51 Engine / Hybrid System _047496 2ZR-FXE FUEL _0241963 FUEL TANK(w/o Canister Pump Module) A

2ZR-FXE FUEL  FUEL TANK(w/o Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 77754B 1.INSTALL CHARCOAL CANISTER OUTLET HOSE

a.

Engage the 2 clamps to install the charcoal canister outlet hose to the fuel tank assembly.


Hide 77209F 2.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the 3 clamps to install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77026A 3.INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.

Engage the 3 clamps to install the No. 1 fuel evaporation tube sub-assembly to the fuel tank assembly.


Hide 77100 4.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.

Using the engine lifter, slowly raise the fuel tank assembly, and then install the fuel tank assembly with the 4 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




Hide 77209F 5.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>2ZR-FXE FUEL>FUEL SYSTEM>PRECAUTION


Hide 77026A 6.CONNECT NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.
A374407C02
1.646,3.26 1.958,3.417 0.313,0.156 10 false *a 1.646,2.073 1.958,2.229 0.313,0.156 10 false *b
*a 120°
*b Up


Connect the No. 1 fuel evaporation tube sub-assembly to the fuel pipe and slide the clip to secure it.

HINT:

Engage the clip within the area shown in the illustration.



Hide 46430 7.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Install the No. 3 parking brake cable assembly with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 77213E 8.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A374405C02
1.292,3.083 1.646,3.083 false 1.729,3.219 2.083,3.219 false 2.198,2.25 2.51,2.406 0.313,0.156 10 false *a 1.594,2.083 1.802,2.229 0.208,0.146 10 true *b 1.115,3.01 1.427,3.167 0.313,0.156 10 false *c 2.135,3.146 2.448,3.302 0.313,0.156 10 false *d
*a 120°
*b Up
*c Paint Mark (Fuel Tank To Filler Pipe Hose)
*d Protrusion (Fuel Tank Assembly)


Connect the fuel tank to filler pipe hose to the fuel tank assembly and tighten the clamp to secure it.

HINT:

Make sure the clamp and fuel tank to filler pipe hose are positioned within the area shown in the illustration.



Hide 9.CONNECT FUEL TANK BREATHER TUBE

a.

Connect the fuel tank breather tube to the fuel tank filler pipe sub-assembly.

Click hereEngine / Hybrid System>2ZR-FXE FUEL>FUEL SYSTEM>PRECAUTION


Hide 77754B 10.CONNECT CHARCOAL CANISTER OUTLET HOSE

a.

Connect the charcoal canister outlet hose to the fuel tank filler pipe sub-assembly.


Hide 77641A 11.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

Install the No. 1 fuel tank protector to the fuel tank assembly with the 4 clips.


Hide 57628C 12.INSTALL REAR FLOOR SIDE MEMBER COVER LH

a.
A374393N02
0.917,1.99 1.042,2.146 0.125,0.156 10 true A 2.135,0.156 2.26,0.313 0.125,0.156 10 true B

Install the rear floor side member cover LH with the clip (B).


b.

Install the 3 bolts and clip (A).

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 58390 13.INSTALL NO. 1 FLOOR UNDER COVER ASSEMBLY

a.

Install the No. 1 floor under cover assembly with the clip.


b.

Install the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 17430 14.INSTALL TAIL EXHAUST PIPE ASSEMBLY

Hide 77020A 15.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 16.ADD FUEL