Home › Engine / Hybrid System › 2ZR-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module)
RM3210E _51 Engine / Hybrid System _047496 2ZR-FXE FUEL _0241965 FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module) A

2ZR-FXE FUEL  FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Connect the fuel sender gauge assembly connector.


c.

Install the harness protector to the wire harness.

NOTICE:

Do not damage the wire harness.



d.

Engage the 2 clamps to connect the wire harness.

NOTICE:

Do not damage the wire harness.



Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY