Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER
RM3210E _59 Vehicle Exterior _047542 EXTERIOR PANELS / TRIM _0243310 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.
B435247C01
0,0 0,0 false
V113147

Install in this Direction


Connect the connector.


b.

Engage the 2 claws as shown in the illustration.


c.
B435245C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 5 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



d.

Install the 4 screws.


e.

Install the rear bumper assembly with the 11 clips.


Hide 81498 2.INSTALL REAR COMBINATION LIGHT COVER LH

Hide 81497 3.INSTALL REAR COMBINATION LIGHT COVER RH

HINT:

Use the same procedure for the LH side.


Hide 4.PERFORM CALIBRATION (w/ TOYOTA Parking Assist-sensor System)