Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for LHD)
RM3210E _54 Brake _047517 BRAKE SYSTEM (OTHER) _0243389 BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for LHD)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad from the brake pedal support assembly.


Hide 47110 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.

Install the nut to the brake pedal support assembly.


b.
C343375C02
0.865,1.604 0.99,1.781 0.125,0.177 10 true 1 2.448,0.625 2.563,0.823 0.115,0.198 10 true 2 0.875,0.594 0.979,0.771 0.104,0.177 10 true 3 2.458,1.594 2.563,1.771 0.104,0.177 10 true 4
V100135

Nut
V100136

Clip


Temporarily install the brake pedal support assembly with 2 new clips.


c.

Install the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)

NOTICE:

Tighten the nuts in the order shown in the illustration.



d.

Install the brake pedal support assembly to the instrument panel reinforcement assembly with the bolt.

Torque:
23.6 N*m (241 kgf*cm, 17 ft.*lbf)


e.

Engage the clamp to install the wire harness to the brake pedal support assembly.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.
C347167C01
0,0 0,0 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the push rod pin and installation hole of the brake pedal support assembly.


b.
C343372

Connect the brake master cylinder push rod clevis to the brake pedal support assembly with the push rod pin, and install a new clip as shown in the illustration.

NOTICE:

Be sure to install the push rod pin in the correct direction.



Hide 47101A 4.INSTALL BRAKE PEDAL RETURN SPRING

a.
C343371C01
0,0 0,0 false
V100136

Front


Install the brake pedal return spring to the brake pedal support assembly and push rod pin as shown in the illustration.


Hide 84345 5.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 6.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 89510D 7.INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY

Hide 8.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 9.INSPECT AND ADJUST BRAKE PEDAL