Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM3210E _56 Audio / Visual / Telematics _047510 AUDIO / VIDEO _0243397 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Disc cannot be Ejected  


PROCEDURE

1.CHECK OPERATION
a.

Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.

OK:

Disc is ejected.



Result:
Proceed to
OK
NG



OK

2.REPLACE DISC AND RECHECK

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

2.REPLACE DISC AND RECHECK
a.

Replace the disc with a new or known good one and check that the malfunction disappears.

OK:

Disc is ejected.



Result:
Proceed to
OK
NG



OK

END (DISC WAS FAULTY)

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY