Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM3210E _56 Audio / Visual / Telematics _047510 AUDIO / VIDEO _0243397 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

The disc is not deformed or cracked.



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

END (DISC IS FAULTY)

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
OK
NG



OK

3.REPLACE DISC AND RECHECK

NG

CLEAN DISC

3.REPLACE DISC AND RECHECK
a.

Replace the disc with a new or known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (DISC WAS FAULTY)

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio and display receiver assembly installation condition.

i.

Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY