Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM3210E _51 Engine / Hybrid System _047527 CRUISE CONTROL _0244350 CRUISE CONTROL MAIN SWITCH A

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 84632 1.INSTALL CRUISE CONTROL MAIN SWITCH

a.

Connect the connector.


b.
E336324C02
0.531,0.677 0.76,0.563 true 0.385,0.896 0.271,1.344 true 0.208,1.365 0.375,1.531 0.167,0.167 10 false *1 0.76,0.469 0.917,0.646 0.156,0.177 10 true *a 2.177,1.385 2.302,1.552 0.125,0.167 10 true 1 2.042,0.771 2.167,0.938 0.125,0.167 10 true 2
*1 Cruise Control Switch Wire
*a Rib


Pass the cruise control switch wire under the rib as shown in the illustration, and temporarily install the cruise control main switch with the 2 screws.


c.

Tighten the 2 screws to install the cruise control main switch.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)

HINT:

Tighten the screws in the order shown in the illustration.



Hide 45130 2.INSTALL HORN BUTTON ASSEMBLY