Home › Vehicle Exterior › DOOR / HATCH › REAR DOOR OPENING TRIM WEATHERSTRIP
RM3210E _59 Vehicle Exterior _047505 DOOR / HATCH _0244383 REAR DOOR OPENING TRIM WEATHERSTRIP A

DOOR / HATCH  REAR DOOR OPENING TRIM WEATHERSTRIP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 62332A 1.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

a.
B433831C01
1.031,0.479 1.146,0.281 false 1.156,0.188 1.469,0.344 0.313,0.156 10 false *a
*a Alignment Mark
V100135

Flange Position


Align the alignment mark on the rear door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip.

NOTICE:
·

Always align the alignment mark with the flange when installing the part. If the alignment mark is not aligned, water ingress may occur.

·

After installation, check that the corners fit correctly.



HINT:
·

Make sure to install the part of the rear door opening trim weatherstrip near the alignment mark first.

·

The color of the alignment marks on the rear door opening trim weatherstrip LH and rear door opening trim weatherstrip RH are different.

Alignment Mark:
Location Color
for LH Side Red
for RH Side Blue





Hide 67918A 2.INSTALL REAR DOOR SCUFF PLATE