Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › ECM
RM3210E _51 Engine / Hybrid System _047494 2ZR-FXE ENGINE CONTROL _0244552 ECM A

2ZR-FXE ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket to the ECM with the 2 screws.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 89667E 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket to the ECM with the 2 screws.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 89661 3.INSTALL ECM

a.

Install the ECM with the bolt and nut.

Torque:
Bolt : 13 N*m (133 kgf*cm, 10 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

If the ECM has been struck or dropped, replace it.



b.

Install the engine wire to the No. 1 ECM bracket with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Engage the 2 clamps.


d.
A375010

Connect the 2 ECM connectors and lower the 2 levers.

NOTICE:
·

When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water or other foreign matter.

·

Be sure to securely connect the ECM connectors.




Hide 4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 5.PERFORM INITIALIZATION