Home › Drivetrain › P610 HYBRID TRANSMISSION / TRANSAXLE › SHIFT CONTROL ACTUATOR
RM3210E _52 Drivetrain _047503 P610 HYBRID TRANSMISSION / TRANSAXLE _0244921 SHIFT CONTROL ACTUATOR A

P610 HYBRID TRANSMISSION / TRANSAXLE  SHIFT CONTROL ACTUATOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.REMOVE SHIFT CONTROL ACTUATOR ASSEMBLY

a.
C343622

Disconnect the shift control actuator assembly connector.


b.
C351534

Remove the 3 shift control actuator bolts and shift control actuator assembly from the hybrid vehicle transaxle assembly.

HINT:

As the position of the shift control actuator assembly is detected automatically, initialization is not necessary after disconnecting and reconnecting the cable to the negative (-) auxiliary battery terminal.