Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3210E _56 Audio / Visual / Telematics _047511 NAVIGATION / MULTI INFO DISPLAY _0245074 NAVIGATION SYSTEM(for Navigation Receiver Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  B158C  SD Card Communication Malfunction  


DESCRIPTION

The navigation receiver assembly stores this DTC when the SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot.

DTC No. Detection Item DTC Detection Condition Trouble Area
B158C SD Card Communication Malfunction The SD card (disc player disc) cannot be mounted when inserted into the SD card (disc player disc) slot.
·

SD card (disc player disc)

·

Navigation receiver assembly



PROCEDURE

1.CHECK SD CARD (DISC PLAYER DISC)
a.

Turn the power switch off and remove the SD card (disc player disc) from the SD card (disc player disc) slot.


b.

Check that the SD card (disc player disc) is not damaged.

Result:
Result Proceed to
The SD card (disc player disc) is not damaged. A
The SD card (disc player disc) is damaged. B




A

2.CLEAN COMPONENTS

B

REPLACE SD CARD (DISC PLAYER DISC)

2.CLEAN COMPONENTS
a.

Check that the terminals of the SD card (disc player disc) are free of foreign matter. Remove foreign matter as necessary.


b.

Check that the SD card (disc player disc) slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.


c.

Insert the SD card (disc player disc) into the SD card (disc player disc) slot.

Result:
Proceed to
NEXT




NEXT

3.CHECK DTC
3.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

END

NG

4.REPLACE SD CARD (DISC PLAYER DISC)
4.REPLACE SD CARD (DISC PLAYER DISC)
a.

Replace the SD card (disc player disc) with a new or known good one.


b.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

c.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

END

NG