Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3210E _56 Audio / Visual / Telematics _047511 NAVIGATION / MULTI INFO DISPLAY _0245074 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

Disc is not cracked or deformed



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

END (DISC IS FAULTY)

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
OK
NG



OK

3.REPLACE DISC AND RECHECK

NG

CLEAN DISC

3.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (DISC WAS FAULTY)

NG

4.CHECK NAVIGATION RECEIVER ASSEMBLY
4.CHECK NAVIGATION RECEIVER ASSEMBLY
a.

Check the navigation receiver assembly installation condition.

i.

Check that the navigation receiver assembly is properly installed.

OK:

The navigation receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

NG

REINSTALL NAVIGATION RECEIVER ASSEMBLY