2005-2008 RAV4 · Service Manual BRAKE

DATA LIST / ACTIVE TEST

System information · Vehicles built Nov 2005 – Jul 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008


READ DATA LIST

HINT:
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without out removing any parts. Reading the Data List early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the intelligent tester on.

  4. Read the Data List according to the display on the tester.

    Skid control ECU 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    ABS Warning Lamp
    ABS warning light / ON or OFF
    ON: ABS warning light ON
    OFF: ABS warning light OFF
    -
    VSC Warning Lamp
    VSC warning light / ON or OFF
    ON: VSC warning light ON
    OFF: VSC warning light OFF
    -
    Brake Warning Lamp
    Brake warning light / ON or OFF
    ON: Brake warning light ON
    OFF: Brake warning light OFF
    -
    Slip Indicator Lamp
    Slip indicator light / ON or OFF
    ON: Slip indicator light ON
    OFF: Slip indicator light OFF
    -
    Downhill assist control Indicator Lamp
    Downhill assist control indicator light / ON or OFF
    ON: Downhill assist control switch ON
    OFF: Downhill assist control switch OFF
    -
    Buzzer
    Skid control buzzer / ON or OFF
    ON: Buzzer ON
    OFF: Buzzer OFF
    -
    Stop Lamp SW
    Stop light switch / ON or OFF
    ON: Brake pedal depressed
    OFF: Brake pedal released
    -
    Parking Brake SW
    Parking brake switch / ON or OFF
    ON: Parking brake applied
    OFF: Parking brake released
    -
    Brake Pedal Load Sensing SW
    Brake pedal load sensing switch / ON or OFF
    ON: Brake pedal depressed beyond the specified point
    OFF: Brake pedal not depressed beyond the specified point
    -
    Main Idle SW
    Main idle switch / ON or OFF
    ON: Accelerator pedal released
    OFF: Accelerator pedal depressed
    -
    Downhill assist control Switch
    Downhill assist control switch / ON or OFF
    ON: Downhill assist control switch ON
    ON: Downhill assist control switch ON
    -
    Gear Position
    Gear position information / P/N, R, 1st-6th, FAIL, NOT R
    -
    -
    Shift Lever Position
    Shift lever position information / P/N, R, D/M, 1st-6th/B, FAIL
    -
    -
    Shift Information
    Shift information / ON or OFF
    ON: During gear change
    -
    Master Cylinder Sensor
    Master cylinder pressure sensor 1 reading / min.: 0 V, max.: 5 V
    When brake pedal released: 0.3 to 0.9 V
    Reading increases when brake pedal depressed
    Zero Point of M/C
    Memorized zero point value of master cylinder pressure sensor / min.: -12.5 MPa, max.: 12.4 MPa
    Min.: -12.5 MPa
    Max.: 12.4 MPa
    -
    Deceleration Sensor
    Deceleration sensor 1 reading / min.: -18.52 m/s2, max.: 18.39 m/s2
    Min.: -18.52 m/s2
    Max.: 18.39 m/s2
    -
    Zero Point of Decele
    Memorized zero point value of deceleration sensor 1 / min.: -25.11 m/s2, max.: 24.91 m/s2
    Min.: -25.11 m/s2
    Max.: 24.91 m/s2
    -
    Deceleration Sensor 2
    Deceleration sensor 2 reading / min.: -18.52 m/s2, max.: 18.39 m/s2
    Min.: -18.52 m/s2
    Max.: 18.39 m/s2
    -
    Zero Point of Decele2
    Memorized zero point value of deceleration sensor 2 / min.: -25.11 m/s2, max.: 24.91 m/s2
    Min.: -25.11 m/s2
    Max.: 24.91 m/s2
    -
    Yaw Rate Sensor
    Yaw rate sensor 1 reading / min.: -128 deg/s, max.: 127 deg/s
    Min.: -128 deg/s
    Max.: 127 deg/s
    -
    Zero Point of Yaw Rate
    Memorized zero point value of yaw rate sensor 1 / min.: -128 deg/s, max.: 127 deg/s
    Min.: -128 deg/s
    Max.: 127 deg/s
    -
    Yaw Rate Sensor2
    Yaw rate sensor 2 reading / min.: -128 deg/s, max.: 127 deg/s
    Min.: -128 deg/s
    Max.: 127 deg/s
    -
    Steering Angle Sensor
    Steering sensor reading / min.: -3276.8 deg, max.: 3276.7 deg
    Left turn: Increase
    Right turn: Decrease
    -
    Zero Point of Steering Angle
    Memorized zero point value of steering sensor / min.: -3276.8 deg, max.: 3276.7 deg
    Min.: -3276.8 deg
    Max.: 3276.7 deg
    -
    Lateral G
    Lateral G / min.: -25.11 m/s2, max.: 24.91 m/s2
    Min.: -25.11 m/s2
    Max.: 24.91 m/s2
    -
    Forward and Rearward G
    Forward and rearward G / min.: -25.11 m/s2, max.: 24.91 m/s2
    Min.: -25.11 m/s2
    Max.: 24.91 m/s2
    -
    Yaw Rate Value
    Yaw rate value / min.: -128 deg/s, max.: 127 deg/s
    Min.: -128 deg/s
    Max.: 127 deg/s
    -
    Steering Angle Value
    Steering angle value / min.: -3276.8 deg, max.: 3276.7 deg
    Min.: -3276.8 deg
    Max.: 3276.7 deg
    -
    FR Wheel Speed
    Wheel speed sensor (FR) reading / min.: 0 km/h (0 mph), max.: 326.4 km/h (202.8 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    FL Wheel Speed
    Wheel speed sensor (FL) reading / min.: 0 km/h (0 mph), max.: 326.4 km/h (202.8 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RR Wheel Speed
    Wheel speed sensor (RR) reading / min.: 0 km/h (0 mph), max.: 326.4 km/h (202.8 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RL Wheel Speed
    Wheel speed sensor (RL) reading / min.: 0 km/h (0 mph), max.: 326.4 km/h (202.8 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    Vehicle Speed
    Maximum speed sensor reading / min.: 0 km/h (0 mph), max.: 326.4 km/h (202.8 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    FR Wheel Acceleration
    FR wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
    Min.: -200.84 m/s2
    Max.: 199.27 m/s2
    -
    FL Wheel Acceleration
    FL wheel acceleration / min.: -200.84 m/s2, max.: 199.271 m/s2
    Min.: -200.84 m/s2
    Max.: 199.27 m/s2
    -
    RR Wheel Acceleration
    RR wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
    Min.: -200.84 m/s2
    Max.: 199.27 m/s2
    -
    RL Wheel Acceleration
    RL wheel acceleration / min.: -200.84 m/s2, max.: 199.27 m/s2
    Min.: -200.84 m/s2
    Max.: 199.27 m/s2
    -
    FR Wheel ABS Ctrl Status
    FR wheel ABS control status / ON or OFF
    ON: During control
    -
    FL Wheel ABS Ctrl Status
    FL wheel ABS control status / ON or OFF
    ON: During control
    -
    RR Wheel ABS Ctrl Status
    RR wheel ABS control status / ON or OFF
    ON: During control
    -
    RL Wheel ABS Ctrl Status
    RL wheel ABS control status / ON or OFF
    ON: During control
    -
    RR Wheel EBD Ctrl Status
    RR wheel EBD control status / ON or OFF
    ON: During control
    -
    RL Wheel EBD Ctrl Status
    RL wheel EBD control status / ON or OFF
    ON: During control
    -
    BA Ctrl Status
    BA control status / ON or OFF
    ON: During control
    -
    TRC (TRAC) Ctrl Status
    TRC control status / ON or OFF
    ON: During control
    -
    TRC (TRAC) Engine Ctrl Status
    TRC engine control status / ON or OFF
    ON: During control
    -
    TRC (TRAC) Brake Ctrl Status
    TRC brake control status / ON or OFF
    ON: During control
    -
    FR Wheel VSC Ctrl Status
    FR wheel VSC control status / ON or OFF
    ON: During control
    -
    FL Wheel VSC Ctrl Status
    FL wheel VSC control status / ON or OFF
    ON: During control
    -
    RR Wheel VSC Ctrl Status
    RR wheel VSC control status / ON or OFF
    ON: During control
    -
    RL Wheel VSC Ctrl Status
    RL wheel VSC control status / ON or OFF
    ON: During control
    -
    Engine Revolutions
    Engine revolutions / min.: 0 r/min, max.: 65535 r/min
    -
    -
    Real Engine Torque
    Real engine torque / min.: -1024 Nm, max.: 1023 Nm
    -
    -
    Accelerator Opening Angle %
    Percentage of accelerator pedal opening angle / min.: 0%, max.: 128%
    -
    -
    Solenoid Relay
    Solenoid relay / ON or OFF
    ON: Solenoid relay ON
    OFF: Solenoid relay OFF
    -
    VSC Motor Relay
    ABS Motor relay (VSC1 relay) / ON or OFF
    ON: Motor relay ON
    OFF: Motor relay OFF
    -
    Fail Safe Motor Relay
    Fail-safe motor relay / ON or OFF
    ON: Motor relay ON
    OFF: Motor relay OFF
    -
    TR(A)C/VSC Solenoid (SM2)
    TRC / VSC solenoid (SM2) / ON or OFF
    ON: Operates
    -
    TR(A)C/VSC Solenoid (SM1)
    TRC / VSC solenoid (SM1) / ON or OFF
    ON: Operates
    -
    ABS Solenoid (SFRH) *1
    ABS solenoid (SFRH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFRR) *2
    ABS solenoid (SFRR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFLH) *3
    ABS solenoid (SFLH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFLR) *4
    ABS solenoid (SFLR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRRH)*5
    ABS solenoid (SRRH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRRR) *6
    ABS solenoid (SRRR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRLH) *7
    ABS solenoid (SRLH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRLR) *8
    ABS solenoid (SRLR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    FR Speed Open
    FR speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    FL Speed Open
    FL speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    RR Speed Open
    RR speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    RL Speed Open
    RL speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    EFI Communication Open
    EFI communication open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Yaw Rate Open
    Yaw rate sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Deceleration Open
    Deceleration sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Steering Open
    Steering angle sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Master Cylinder Open
    Master cylinder pressure sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Number of DTC
    Number of recorded DTCs/ min.: 0, max.: 255
    Min.: 0
    Max.: 255
    -
    Inspection Mode
    Inspection mode / OTHER or INSPECT
    -
    -
    Number of IG ON (Inspection)
    Number of ignition switch on (IG) operations after entering the inspection mode / min.: 0, max.: 255
    -
    -

    HINT:
    1. *1: SFRH (S: Solenoid, F: Front, R: Right, H: Holding)
    2. *2: SFRR (S: Solenoid, F: Front, R: Right, R: Reduction)
    3. *3: SFLH (S: Solenoid, F: Front, L: Left, H: Holding)
    4. *4: SFLR (S: Solenoid, F: Front, L: Left, R: Reduction)
    5. *5: SRRH (S: Solenoid, R: Rear, R: Right, H: Holding)
    6. *6: SRRR (S: Solenoid, R: Rear, R: Right, R: Reduction)
    7. *7: SRLH (S: Solenoid, R: Rear, L: Left, H: Holding)
    8. *8: SRLR (S: Solenoid, R: Rear, L: Left, R: Reduction)


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the intelligent tester on.

  4. Perform the Active Test according to the display on the tester.

    HINT:
    1. The ignition switch must be turned on (IG) to proceed to the ACTIVE TEST using the intelligent tester.
    2. The ACTIVE TESTs of the ABS solenoid, ABS motor relay, ABS warning light and BRAKE warning light are available when the vehicle is stopped.
    3. The motors stop automatically after 5 seconds of activation to prevent them from being damaged. When the motors are driven repeatedly, certain intervals are required.
    4. Each solenoid stops automatically after 2 seconds of activation to prevent them from being damaged, and can be operated again after a certain interval.
    5. Do not depress the brake pedal while only the pressure reduction solenoid valves are on.
    6. Do not drive 2 or more solenoids simultaneously except to operate the pressure holding solenoid valves and pressure reduction solenoid valves of each wheel.
    7. w/ Multi-information display:
      When performing each item of the Active Test, the combination meter's master caution indicator light illuminates, and "CHECK VSC SYSTEM" is displayed on the multi-information display.

    Skid control ECU 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    ABS Warning Lamp
    ABS warning light
    ON / OFF
    Observe combination meter
    VSC Warning Lamp
    VSC warning light
    ON / OFF
    Observe combination meter
    Brake Warning Lamp
    Brake warning light
    ON / OFF
    Observe combination meter
    Slip Indicator Lamp
    Slip indicator light
    ON / OFF
    Observe combination meter
    DAC Indicator Lamp
    Downhill assist control indicator light
    ON / OFF
    Observe combination meter
    Buzzer
    Skid control buzzer
    ON / OFF
    Buzzer can be heard
    Stop Lamp Relay
    Stop Light relay (BRK relay)
    ON / OFF
    Operation sound of motor can be heard
    Solenoid Relay
    ABS solenoid relay ON / OFF
    ON / OFF
    -
    Motor Relay
    ABS motor relay
    ON / OFF
    Operation sound of motor can be heard
    ABS Solenoid (SRLR)
    ABS solenoid (SRLR)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRLH)
    ABS solenoid (SRLH)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRR)
    ABS solenoid (SRRR)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRH)
    ABS solenoid (SRRH)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLR)
    ABS solenoid (SFLR)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLH)
    ABS solenoid (SFLH)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFRR)
    ABS solenoid (SFRR)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFRH)
    ABS solenoid (SFRH)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    VSC/TRC Solenoid (SMR)
    VSC / TRC solenoid (SMR)
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard
    VSC/TRC Solenoid (SMF)
    VSC / TRC solenoid (SMF (BA-SOL))
    ON / OFF
    Operation sound of solenoid (clicking sound) can be heard

← FAIL-SAFE CHART (from Aug 2008)DATA LIST / ACTIVE TEST (from Aug 2008) →