2005-2008 RAV4 · Service Manual BRAKE

C0226/21 SFR Solenoid Circuit

Diagnostic trouble codes · Vehicles built Nov 2005 – Dec 2006

Also covers:

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007

DESCRIPTION

This solenoid is turned on in accordance with signals from the skid control ECU and controls the pressure on the wheel cylinders to control the braking force.
DTC No.
DTC Detection Condition
Trouble Area
C0226/21
C0236/22
C0246/23
C0256/24
Open or short in solenoid circuit continues for 0.05 seconds or more.
Brake actuator

HINT:
C0226/21, C0236/22, C0246/23, C0256/24:
The skid control ECU begins to detect these DTCs when the vehicle speed exceeds 6 km/h (4 mph).


WIRING DIAGRAM

C126280E02

INSPECTION PROCEDURE


1. RECONFIRM DTC
  1. Clear the DTC(s) (Click here).

  1. Start the engine.

  1. Drive the vehicle at 6 km/h (4 mph) or more to activate the initial check.

  1. Check if the same DTC(s) is output (Click here).

    Result 
    Result
    Proceed to
    DTC is output
    A
    DTC is not output
    B

    HINT:
    The DTCs may be stored due to a malfunction in the connector terminal.



B
END
A

REPLACE BRAKE ACTUATOR ASSEMBLY


← C0210/33 Right Rear Wheel Speed Sensor Signal (+ 7 more codes) (from Aug 2008)C0226/21 SFR Solenoid Circuit (+ C0236/22, C0246/23, C0256/24) (Jan 2007 – Jul 2007) →