ABS Warning Light does not Come ON
Circuit diagnosis · Vehicles built from Aug 2007
Versions by build date: Nov 2005 – Jul 2007 from Aug 2007
WIRING DIAGRAM
Refer to the ABS warning light circuit (Click here).INSPECTION PROCEDURE
| 1. CHECK CAN COMMUNICATION SYSTEM |
 |
Check if the CAN communication system DTC is output (Click here).
Result
Result
|
Proceed to
|
DTC is not output
|
A
|
DTC is output
|
B
|
|
B |
 |
|
| REPAIR CAN COMMUNICATION SYSTEM |
|
|
| A |
|
 |
|
| 2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (ABS WARNING LIGHT) |
 |
Select the Active Test, generate a control command, and then check that the ABS warning light operates.
Skid control ECU
Item (Display)
|
Test Details
|
Diagnostic Notes
|
ABS Warning Lamp
|
Turns ABS warning light / ON or OFF
|
Observe combination meter
|
- OK:
- The ABS warning light turns on or off.
|
NG |
 |
|
| CHECK METER / GAUGE SYSTEM |
|
|
| OK |
|
 |
|
| REPLACE BRAKE ACTUATOR ASSEMBLY |
|