Removal / installation · Vehicles built from Aug 2007
1.
REMOVE RADIATOR SUPPORT OPENING COVER
Remove the 9 clips and cover.
2.
REMOVE V-BANK COVER SUB-ASSEMBLY
Detach the 3 clips and remove the V-bank cover.
3.
DISCONNECT RADIATOR RESERVOIR TANK ASSEMBLY
Remove the 2 bolts and disconnect the reservoir tank.
4.
REMOVE NO. 1 ENGINE UNDER COVER
Remove the 2 bolts, 4 screw, 10 clips and under cover.
5.
REMOVE REAR ENGINE UNDER COVER RH
Remove the 2 clips and under cover.
6.
REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
Remove the 4 bolts and reinforcement.
7.
REMOVE V-RIBBED BELT
Rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the V-ribbed belt.
While turning the belt tensioner counterclockwise, align its holes, and then insert a 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner in place.