INSTALLATION
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. INSTALL WATER PUMP ASSEMBLY |
Install a new gasket onto the timing chain cover as shown in the illustration.

Clean the 7 bolts and 7 bolt holes.
Temporarily install the water pump.

- Standard bolt length:
Item
Specified Condition
Bolt A and C
45 mm (1.77 in.)
Bolt B
30 mm (1.18 in.)
Apply adhesive to 2 or 3 threads of the bolt labeled A.
- Adhesive:
- Toyota genuine adhesive 1324, three bond 1324 or equivalent.
Temporarily install the water pump with the 7 bolts.
Tighten the 2 bolts indicated by the arrows in the illustration. Then tighten the other bolts.

- Torque:
- 32 N*m{ 326 kgf*cm , 24 ft.*lbf }
| 2. INSTALL NO. 2 IDLER PULLEY |
![]() ![]() |
Install the No. 2 idler pulley and No. 2 idler pulley plate with the pulley bolt.
- Torque:
- 40 N*m{ 408 kgf*cm , 30 ft.*lbf }
| 3. INSTALL ENGINE ASSEMBLY |
Install the engine (Click here).

