2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ACCELERATOR PEDAL ROD

  1. A127589E01
    Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 bolts and accelerator pedal rod.

    NOTICE:
    1. Do not drop or strike the accelerator pedal rod.
    2. Do not disassemble the accelerator pedal rod.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →