INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL TELEVISION CAMERA ASSEMBLY |
Install the television camera with the screw.

Attach the clamp and connect the television camera connector.

| 2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Install the 2 license plate lights (Click here).
Connect the connector.

Attach the 6 clips and 3 nuts.
install the back door outside garnish.
| 3. INSTALL BACK DOOR TRIM BOARD |
Install the back door trim pocket with the 5 screws.
Attach the 13 clips to install the trim board.

| 4. INSTALL BACK DOOR SIDE GARNISH LH |
Attach the 2 claws and 2 clips to install the garnish.

| 5. INSTALL BACK DOOR SIDE GARNISH RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. INSTALL BACK DOOR CENTER GARNISH |
Attach the 4 claws and 4 clips to install the garnish.

| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
