B2277 Detecting Vehicle Submersion
Diagnostic trouble codes · Vehicles built from Jan 2007
DESCRIPTION
This DTC is output when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B2277 |
Submersion circuit monitor inside main body ECU detects that vehicle is submerged in water |
Main body ECU |
INSPECTION PROCEDURE
- HINT:
- Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.
| 1. CHECK WHETHER DTC OUTPUT RECURS |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and turn the tester ON.
Clear the DTCs.
Check whether DTC B2277 recurs 270 to 330 seconds or more after the engine switch is turned on (IG).
- OK:
- No DTC is output.
|
|
||||
| OK | ||
| ||
