2005-2008 RAV4 · Service Manual ENGINE

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Nov 2005


CHECK DTC
B127990E01
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Body ECU / DTC.

  4. Check DTCs and write them down.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.

  5. Confirm the details of the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) (do not start the engine) and turn the intelligent tester ON.

  3. Select the following menu items: Body / Body ECU / DTC / Clear.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  4. Erase DTCs by pressing the YES button on the tester.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.

← DIAGNOSIS SYSTEM (from Nov 2005)DATA LIST / ACTIVE TEST (from Nov 2005) →