REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL |
|
| 3.
REMOVE BATTERY CLAMP |
 |
- Remove the bolt and loosen the nut.
Detach the 2 wire harness clamps.
Detach the hook of the battery clamp from the battery bracket front, and then remove the battery clamp.
| 4.
REMOVE BATTERY INSULATOR |
|
| 6.
REMOVE FRONT BATTERY BRACKET |
 |
- Detach the 2 wire harness clamps.
Remove the 4 bolts and bracket front.
| 7.
REMOVE BATTERY BRACKET REINFORCEMENT |
 |
Remove the 2 bolts and reinforcement bracket.
| 8.
REMOVE STARTER ASSEMBLY |
 |
- Disconnect the starter connector.
Open the terminal cap, remove the nut and disconnect the starter wire.
- Remove the 2 bolts and starter.