DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE MAGNETIC SWITCH ASSEMBLY |
 |
- Remove the nut and disconnect the lead wire from the magnetic switch.
- Remove the 2 screws holding the magnetic switch to the starter drive housing.
Remove the magnetic switch.
Remove the return spring and plunger from the starter drive housing.
| 2.
REMOVE STARTER YOKE ASSEMBLY |
 |
- Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.
- Remove the starter yoke from the commutator end frame.
| 3.
REMOVE STARTER ARMATURE PLATE |
 |
- Remove the armature plate from the starter yoke.
| 4.
REMOVE STARTER COMMUTATOR END FRAME COVER |
 |
- Using a screwdriver, pry out the commutator end frame cover.
| 5.
REMOVE STARTER ARMATURE ASSEMBLY |
 |
- Using snap ring pliers, remove the snap ring and plate washer.
Remove the armature from the commutator end frame.
| 6.
REMOVE PLANETARY GEAR |
 |
- Remove the 3 planetary gears from the starter drive housing.