CD Sound Skips
Circuit diagnosis · Vehicles built from Nov 2005
INSPECTION PROCEDURE
| 1. CLEAN CD |
Clean the disc by wiping the CD's underside radially with a soft cloth.

- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
|
||||
| NG | |
| 2. REPLACE CD WITH ANOTHER AND RECHECK |
Replace the CD with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| NG | |
| 3. CHECK WHEN PROBLEM OCCURS |
Check the location in which CD skipping occurs.
Result Result
Proceed to
Driving surface is bumpy or rough
A
Driving surface is normal
B
|
|
||||
| A | |
| 4. CHECK RADIO AND NAVIGATION ASSEMBLY INSTALLATION |
Check the installation condition of the radio and navigation assembly.
- OK:
- Installed properly.
|
|
||||
| OK | |
| 5. INSTALL RADIO AND NAVIGATION ASSEMBLY IN ANOTHER VEHICLE OF SAME MODEL AND COMPARE |
Remove the radio and navigation assembly and install it in another vehicle of the same model. Check if the CD sound skips.
- OK:
- CD sound does not skip.
|
|
||||
| NG | |
| 6. DID TEMPERATURE IN CABIN CHANGE RAPIDLY? |
Check whether or not a rapid temperature change occurred in the cabin.
- OK:
- Rapid temperature change occurred.
- HINT:
- A rapid temperature change creates condensation inside the CD player, which may disable CD playback.
|
|
||||
| OK | ||
| ||
