2005-2008 RAV4 · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE CLUTCH START SWITCH ASSEMBLY (w/ Entry and Start System)
  1. Disconnect the clutch start switch connector.

  1. Remove the nut and clutch start switch from the clutch pedal support.


2. REMOVE CLUTCH START CANCEL SWITCH ASSEMBLY (w/ Cruise Control System)
  1. Remove the switch assembly.
    For 1AZ-FE, 2AZ-FE, refer to the following procedures (Click here).
    For 2AD-FTV, 2AD-FHV, refer to the following procedures (Click here).


3. REMOVE CLUTCH PEDAL SPRING

C125482
  1. Remove the clutch pedal spring.


4. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

  1. C125483
    Remove the clutch pedal return spring.

  1. C125484
    Remove the bolt, nut and clutch pedal from the clutch pedal support.


5. REMOVE CLUTCH PEDAL SPRING HOLDER

C125485
  1. Remove the clutch pedal spring holder.


6. REMOVE COLLAR

C125486
  1. Remove the 2 bushes and collar.


7. REMOVE CLUTCH PEDAL SPRING WITH HOOK

C125487
  1. Remove the hook from the clutch pedal.


8. REMOVE CLUTCH PEDAL TURNOVER BUSH

C125488E03
  1. Remove the bush from the clutch pedal.

  1. Remove the 2 cushions from the clutch pedal.


9. REMOVE PEDAL SPRING HOOK

C125489
  1. Remove the hook from the clutch pedal support.

← REMOVAL (from Jan 2007)ADJUSTMENT (from Nov 2005) →