2005-2008 RAV4 · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. INSTALL PEDAL SPRING HOOK

C128476E01
  1. Apply MP grease to the contact surface of the hook.

  1. Install the hook.


2. INSTALL CLUTCH PEDAL CUSHION

C128849
  1. Install the cushion to the clutch pedal.


3. INSTALL COLLAR

C128475E01
  1. Apply MP grease to both sides of a new collar and 2 new bushes.

  1. Install the collar.

  1. Install the 2 bushes.


4. INSTALL CLUTCH PEDAL SUB-ASSEMBLY

C128473
  1. Install the clutch pedal to the clutch pedal support with the bolt and nut.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Install the bolt from the right side of the vehicle.

  1. C128472E01
    Install the clutch pedal return spring.


5. INSTALL CLUTCH PEDAL SPRING HOLDER

C128474E01
  1. Apply MP grease to the contact surface of the clutch pedal spring holder.

  1. Install the clutch pedal spring holder.


6. INSTALL CLUTCH PEDAL SPRING

C128471E01
  1. Apply MP grease to the contact surface of the clutch pedal.

  1. Install the spring.


7. INSTALL CLUTCH START SWITCH ASSEMBLY (w/ Entry and Start System)
  1. Install the clutch start switch with the nut.

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

  1. Connect the clutch start switch connector.


8. INSTALL CLUTCH START CANCEL SWITCH ASSEMBLY (w/ Cruise Control System)
  1. Install the switch assembly.
    For 1AZ-FE, 2AZ-FE, refer to the following procedures (Click here).
    For 2AD-FTV, 2AD-FHV, refer to the following procedures (Click here).

← ADJUSTMENT (from Nov 2005)INSTALLATION (Nov 2005 – Dec 2006) →