INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL TRANSMITTER BATTERY |
 |
- NOTICE:
- Take extra care when handling these precision electronic components.
- Install a battery (lithium battery: CR2016) with the positive (+) side facing upWARD, as shown in the illustration.
- NOTICE:
- Be careful not to bend the transmitter battery electrode during insertion.
- Keep the transmitter cover interior free of dust and oil.
- install the cover.
| 2.
INSTALL DOOR CONTROL TRANSMITTER MODULE |
 |
| 3.
INSTALL TRANSMITTER HOUSING COVER |
 |
- Install the transmitter housing cover to the transmitter housing case.
Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times.
- OK:
- Transmitter's LED illuminates 3 times when switch is pressed 3 times.