REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE TRANSMITTER HOUSING COVER |
 |
- NOTICE:
- Take extra care when handling these precision electronic components.
- Twist the screwdriver in the direction of the arrow mark in the illustration, and open the transmitter housing cover.
- NOTICE:
- Do not forcibly pry the cover.
- HINT:
- Tape the screwdriver tip before use.
| 2.
REMOVE DOOR CONTROL TRANSMITTER MODULE |
 |
| 3.
REMOVE TRANSMITTER BATTERY |
 |
- Twist the coin in the direction of the arrow mark in illustration, and remove the transmitter battery's cover.
- Remove the battery (lithium battery: CR2016).
- NOTICE:
- Do not push the terminals with your finger.
- Do not forcibly pry up the battery. The terminals may become damaged.
- Do not touch the battery with wet hands. Water may cause rust.
- Do not touch or move any components inside the transmitter. It may cease to work.