REMOVAL
Removal / installation · Vehicles built from Nov 2005
- HINT:
- Use the same procedures for the RH side and LH sides.
- The procedures listed below are for the LH side.
| 1.
REMOVE FRONT WIPER BLADE |
 |
- Detach the claw as shown in the illustration.
- Remove the wiper blade as shown in the illustration.
- NOTICE:
- Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.
| 2.
REMOVE FRONT WIPER BLADE LH (for Plastic Type) |
 |


Remove the wiper blade holder as shown in the illustration.
Remove the wiper blade.
| 3.
REMOVE WIPER RUBBER |
 |
- Detach the head part (large side) of the wiper rubber from the wiper blade.
- Remove the wiper rubber in the direction indicated by the arrow in the illustration.
- NOTICE:
- Do not pull out the wiper rubber forcibly. Doing so will deform the backing plate or damage the blade claw.
Remove the 2 wiper rubber backing plates from the wiper rubber.
| 4.
REMOVE WIPER RUBBER (for Plastic Type) |
 |
Detach the head part (large side) of the wiper rubber from the wiper blade.
Remove the wiper rubber in the direction indicated by the arrow in the illustration.
- Remove the 2 wiper rubber backing plates from the wiper rubber.