INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY |
 |
Install the windshield washer motor and pump to the packing of the washer jar.
| 2.
INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
 |
- Install the windshield washer motor and pump to the packing of the washer jar.
| 3.
INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System) |
 |
Install the headlight cleaner motor and pump to the packing of the washer jar.
| 4.
INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System) |
 |
Install the windshield washer jar and pump with the 3 bolts.
Connect all the connectors.
| 5.
FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID (w/o Headlight Cleaner System) |
 |
Connect the washer hoses to the washer motor and pump, and fill the washer jar with washer fluid.
| 6.
INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System) |
 |
Install the windshield washer jar and pump with the 3 bolts.
Connect all the connectors.
| 7.
FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
 |
Connect the washer hoses to the washer motor and pump, and fill the washer jar with washer fluid.
| 8.
INSTALL FRONT BUMPER COVER
|
 |
- Put protective tape under the front fender and headlight.
Install the 4 clips.
- Install the hood cushion center.
w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
- Attach the 4 claws to install the bumper cover.
- Install the 8 screws.
| 9.
INSTALL FRONT FENDER LINER LH
|
 |
- Install the fender liner with the clip and fender liner retainer.
w/ Splash Shield:
Install the front fender splash shield LH.
Install the screw, nut and bolt.
| 10.
INSTALL FRONT FENDER LINER RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 11.
INSTALL WASHER INLET SUB-ASSEMBLY |
 |
- Install the washer inlet of the washer jar and pump to the windshield washer jar and pump.
- Install the washer inlet of the washer jar and pump with the clip.
| 12.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|