INSTALLATION
Removal / installation · Vehicles built from Jan 2007
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1.
INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) |
 |
Install the front seat inner belt with the nut.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.
for Driver Seat:
Attach the 2 clamps and connect the 2 connectors.
for Passenger Seat:
Attach the 2 clamps and connect the 2 connectors.
| 2.
INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) |
 |
Install the front seat inner belt with the nut.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.
for Driver Seat:
Attach the 2 clamps and connect the 2 connectors.
for Passenger Seat:
Attach the 3 clamps and connect the 2 connectors.
| 3.
INSTALL FRONT SEAT CUSHION INNER SHIELD LH (for Power Seat)
|
 |
- Attach the clip and 3 claws to install the inner shield.
Install the screw.
| 4.
INSTALL FRONT SEAT CUSHION INNER SHIELD LH (for Manual Seat)
|
 |
- Attach the clip and claw to install the inner shield.
Install the screw.
| 5.
INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
|
 |
Place the seat in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors under the seat.
Connect the cable to the negative (-) battery terminal.
- Operate the power seat switch knob and move the seat to the rearmost position.
Install the 2 bolts to the front side of the seat.
-
Torque:
- 37 N*m{
377 kgf*cm
, 27 ft.*lbf
}
- HINT:
- Tighten the 2 bolts in the order indicated in the illustration.
- Operate the power seat switch knob and move the seat to the foremost position.
Install the 2 bolts to the rear side of the seat.
-
Torque:
- 37 N*m{
377 kgf*cm
, 27 ft.*lbf
}
- HINT:
- Tighten the 2 bolts in the order indicated in the illustration.
- Install the front seat track bracket outer cover in the direction indicated by the arrow in the illustration and attach the 2 claws.
- Install the front seat track bracket inner cover in the direction indicated by the arrow in the illustration and attach the 2 claws.
| 6.
INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
|
 |
Place the seat in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connector under the seat.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
- Install the 2 bolts to the front side of the seat.
-
Torque:
- 37 N*m{
377 kgf*cm
, 27 ft.*lbf
}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
Lift up the seat track adjusting handle and move the seat to the foremost position.
- Install the 2 bolts to the rear side of the seat.
-
Torque:
- 37 N*m{
377 kgf*cm
, 27 ft.*lbf
}
- HINT:
- Tighten the bolts in the order indicated in the illustration.
| 7.
INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH
|
 |
- Install the outer cover in the direction indicated by the arrow in the illustration and attach the 2 claws.
| 8.
INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH
|
 |
- Install the inner cover in the direction indicated by the arrow in the illustration and attach the 2 claws.
| 9.
INSTALL SEAT TRACK BRACKET COVER INNER FRONT RH |
 |
Use the same procedures described for the LH side.
| 10.
INSTALL SEAT TRACK BRACKET COVER OUTER FRONT RH |
 |
Use the same procedures described for the LH side.
| 11.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|